Motorcycle Tech Tips & DIY Garage How-Tos – Cycle Source Magazine
Brake Bleeding
Published In The December 2013 Issue Article & Photos By: Will Ramsey www.faithforgottenchoppers.com First off, I would like to apologize for my lack of tech articles over the last couple issues. I was super focused on completing the build…
Wire Plus Wiring System
Published In The December 2013 Issue Of Cycle Source Article By: Gary Maurer & Jules Photos By: Jordan Campbell & Wrench Well, here we go. When Kustoms Inc. was asked to be the lead builder, with Ron Harris from Chop Doc’s Choppers, we…
Shaving Fork Legs
Published In the November 2013 Issue Of Cycle Source Words and Photos By: Ross Lenoir and Ian Smith of Americana Speed Shop Shaving brake tabs and fender mounts off of cast fork lower legs is a timeless modification that most Chopper Jockeys…
Barnett Clutch Install
Originally Published In The September 2013 Issue Of Cycle Source Magazine Clutches can be easily overlooked as long as your adjustment is correct. We get on our bikes and as long as it’s working, away we go. Well, at least that’s what I do. I…
Valve Guide Replacement
Published In The November 2013 Issue Of Cycle Source Well it’s always a bummer, but it needs replaced! It’s not easy to diagnose a faulty valve guide. In this case, the rear cylinder was running like it was low on compression. It was burning oil…
Take Charge Of Your Charging System
Article & Photos By: Bart Mitchell (Bart Alan Photography - mrbreezephotos@yahoo.com) Originally Published In The October 2013 Issue Of Cycle Source Magazine Charging systems can be misdiagnosed or all out forgotten about. This is the heart…
The High Life – Part 3
Article By: Daniel Donley At Pandemonium Custom Choppers www.pandemoniumc2.com Originally Published In The September 2013 Issue Of Cycle Source Magazine "Life sometimes isn’t easy, so when you can find time to hang out in the shop with your…
Million Mile Bike
Originally Published In The August 2013 Issue Of Cycle Source Magazine In last month’s article, I wrote about building the bottom end of a Twin Cam and what makes it last. In this issue, I will explain building the top end. Again, not only in…
Getting Twisted
Originally Published In The July 2013 Issue Of Cycle Source Magazine Back in the May issue of Cycle Source, we caught up with Twisted Tea on the ’77 Shovelhead they are rebuilding and things seem to be moving along pretty quickly. “The engine…
The High Life Project: Part 2
Article By: Daniel Donley At Pandemonium Custom Choppers - www.pandemoniumc2.com Originally Published In The August 2013 Issue Of Cycle Source Magazine Wow! Time flies when you’re having fun! Duke stopped by for a couple days and we got some…
Top Stories
