Motorcycle Tech Tips
Million Mile Bike
Originally Published In The August 2013 Issue Of Cycle Source Magazine In last month’s article, I wrote about building the bottom end of a Twin Cam and what makes it last. In this issue, I will explain building the top end. Again, not only in…
Getting Twisted
Originally Published In The July 2013 Issue Of Cycle Source Magazine Back in the May issue of Cycle Source, we caught up with Twisted Tea on the ’77 Shovelhead they are rebuilding and things seem to be moving along pretty quickly. “The engine…
The High Life Project: Part 2
Article By: Daniel Donley At Pandemonium Custom Choppers - www.pandemoniumc2.com Originally Published In The August 2013 Issue Of Cycle Source Magazine Wow! Time flies when you’re having fun! Duke stopped by for a couple days and we got some…
Speedking Fork Lowering
Article By: Will Ramsey - Faith Forgotten Choppers Originally Published In The July 2013 Issue Of Cycle Source Magazine This month, I decided to change things up and venture out of my shop in search of new tech article information. I found…
Trimming The Fat: Chopping A Custom Tank
Article And Photos By: Will Ramsey Faith Forgotten Choppers www.faithforgotten.com Originally Published In The August 2013 Issue Of Cycle Source Magazine A few weeks ago, I received a phone call from a builder in New York who wanted me to…
The High Life Project
Article By: Daniel Donley At Pandemonium Custom Choppers www.pandemoniumc2.com Originally Published In The July 2013 Issue Of Cycle Source Magazine This all started last July at MountainFest in Morgantown, WV. Duke was checkin’ out a Yamaha…
Daniel Donley – Slip N Slide
So your bike has a leak, whether it be an O-ring or a seal. The last thing we want to happen is to tear or rip that seal while replacing it over a threaded or a spline shaft. So with seals in hand we cut open the bag and remove the seals, but…
Tig Welding Tips N’ Tricks
Article By: Will Ramsey - Faith Forgotten Choppers Originally Published In The April 2013 Issue Of Cycle Source Magazine This tech article is intended to be an introduction and simplification of selecting and preparing a tungsten electrode for…
Four Speed Release Forks
Article By: Will Ramsey - Faith Forgotten Choppers Originally Published In The May 2013 Issue Of Cycle Source Magazine It’s really hard to beat the old style 4-speed transmission on a chopper. It has a classic style, a simple construction, and…
Installing Rippled Pipes
Article By: Lucas Joyner www.thefactorymetalworks.com Originally Published In The May 2013 Issue Of Cycle Source Magazine This month, The Factory Metal Works will show you how to install that shag carpet feel on your new or not so new exhaust…
Top Stories
