Motorcycle Tech Tips & DIY Garage How-Tos – Cycle Source Magazine
Replacement Kick Stand Lug
Article By: Tyler Malinky Originally Published In The March 2012 Issue Of Cycle Source Magazine So many old bikes the frames have been used, abused, and modified. A common problem on Triumphs is a broken side stand lug. The following is a great…
Garage Built Pipes
Article By: Paul Wideman www.bareknucklechoppers.com Photos By: Chris Callen Originally Published In The February 2012 Issue Of Cycle Source Magazine We’re gonna be doing a tech tip here on garage built exhaust pipes for the do-it-yourselfer.…
Beer Runner – Part 14
Article By: Wayne At Wicked Willy’s Choppers www.wickedwillychoppers.com Originally Published In The February 2012 Issue Of Cycle Source Magazine We are now down to the end of our build, all parts are made and everything is done but the wiring.…
Repairing A Spark Plug Hole
Article By: Tyler Malinky Originally Published In The February 2012 Issue Of Cycle Source Magazine Especially when it comes to old motorcycles, you may find that threaded holes for fasteners or spark plugs may have been a bit abused. It doesn’t…
Going to Work On Old Panheads At Grimey’s Shop
Originally Published In The January 2013 Issue Of Cycle Source Magazine A huge problem with Pan heads is that exhaust leak around the head. It seems you just can’t ever get that exhaust clamp tight enough. Well, it’s probably A because your…
Installing Axel Sliders With Fab Kevin
Article By: Chris Callen Photos By: Jean Munier Originally Published In The January 2012 Issue Of Cycle Source Magazine Okay, so this is gonna seem like a very basic tech tip for some of our readers but this is just a great product and something…
Twelve Steps With Baker
Article And Photos By: Trish Horstman Originally Published In The January 2012 Issue Of Cycle Source Magazine Like most people out there, we at the Cycle Source garage are looking to do more stuff in-house to save a couple bucks when and where…
Twisted Tank – With Kai Morrison
Article And Photos By: Lemme Originally Published In The January 2012 Issue Of Cycle Source Magazine I’m back in hopes that your taste in reading hasn’t improved any, so here it goes. I was sitting in the driver’s seat, putting some miles on my…
The High Life – Part 6
Article By: Daniel Donley At Pandemonium Custom Choppers www.pandemoniumc2.com Originally Published In The December 2013 Issue Of Cycle Source Magazine Last month we got the bike all mocked up, then tore down for finish welding, and then got…
Part 5 Of The High Life Project
Published In The November 2013 Issue Of Cycle Source Article & Photos By: Daniel Donley I'm pretty stoked this month! We got the ACME Choppers’ Springer! Let me tell ya, this thing is sweet: great craftsmanship, nice lookin’ welds and…
Top Stories
