Winfield, KS– Wire Plus Powersports Electronics is proud to introduce their new “Old School” seat post mounted system. This new state-of-the-art system features a CNC machined old school ball-milled look on its tear drop shaped chromed billet housing that mounts the power control module and ignition switch. This assembly plugs into a pre-assembled harness that will be selected by the style of handlebar switches and turn signals used in your application.
Exclusive to Wire Plus is a unique feature found on this seat posted mounted module that shuts off just the front lighting when starting and leaves the taillights on for safety during nighttime starting. This puts less of a strain on the battery while starting and still provides the rider with “rear light” protection. Anyone stuck on the side of the road at night will be seen by other drivers while trying to start their bike due to this new safety feature. This power control module has 4-15 amp breakers, isolated compression release circuit, replaceable start relay and diagnostic LED’s which can be viewed through holes in the face of the housing.
The housing mounts to the seat post coil bracket on Big Twins from 1941 thru 1984 and custom frames using the same style coil mount. Available for stock style handlebar controls and includes integrated load sensing, auto-canceling, lighting control module to run rear turn signals as running lights, brake lights and turn signals. Also available as chopper style with automotive start switch and pre-assembled harness for minimal system switches. (Can be used with or without turn signals). Available in black anodized or luxurious chrome finishes…Suggested Retail: $499.00 for chopper style wiring system and 599.00 for lighting control integrated wiring system. Reliability…Ease of Installation…and Quality all in One…Wire Plus!
For those interested in obtaining more information on Wire Plus, you can reach them at (620) 221-2417 or check them out online at www.wire-plus.com or email them at sales@wire-plus.com.