Wire Plus Introduces Power, Lighting Control Modules and Wiring Harnesses for Most Custom Production Bikes

clip_image002Many custom production bikes that were being made in the 90’s –mid-2000’s are now experiencing electrical problems due to a variety of reasons. Bike owners can now go to a one-stop company for all of their electrical needs…Wire Plus. Over the last 16 years, Wire Plus has produced a wide variety of individual power and lighting modules and wiring harnesses at the builders and manufacturers requests. Finding electrical parts is no longer like “looking for a needle in a haystack” for these custom production bikes.

Wire Plus’ sells their power control, lighting control and auto cancel modules separately or as part of a complete kit and can be plugged right into the existing harness with no hassle. Their power modules are submersible waterproof and very compact in size with harnesses that are engineered to be smaller than any other on the market. The lighting control module controls the operation of the front, rear turn signals, and provides load equalization and auto cancelling. It also operates the rear turn signals as brake lights and running lights with one wire hook-up. Wire Plus’ main focus is on the reliability of everything that they manufacture. clip_image002[4]

Their pre-assembled wiring harnesses are designed for bikes with and without stock or aftermarket ignitions, electric or kick start and can be used with or without turn signals and a variety of other options. These mid-frame harnesses are for completely rewiring any manufacturers bikes…including older Harleys

These replacement modules and wiring harnesses work on all of the following models…clip_image002[6]

American Iron Horse • American Performance Cycle/APC • Apollo Choppers

Big Bear Choppers • Big Dog • Brass Balls Choppers • CCI Kit Bikes • Confederate • Covington Cycle City • Create A Custom Cycle • Custom Works

DD Customs • Eagle • Echelon • Ecosse • Edmondson Custom Built

Hellbound Steel Motorcycles/HBS • Ironworks • Legends • Minneapolis Custom Cycles • Ness Bikes • Orange County Choppers • Paramount Custom Cycles • Patriot • Pro-One • Proper Chopper • Pure Steel • Raven • Red Hot • Red Horse • Ridley • Spencer Bowman Customs • Steed • Swift • V8 Choppers • Thunder Mountain Custom Cycles • Ultra Cycles

For those interested in obtaining more information on Wire Plus, you can reach them at (620) 221-2417 or check them out online at www.wire-plus.com or email them at sales@wire-plus.com.

9 thoughts on “Wire Plus Introduces Power, Lighting Control Modules and Wiring Harnesses for Most Custom Production Bikes

  1. I have a big dog with a wire plus electrical system I need the modular that has a 12 pin plug in and a 6 pin with only five pins in it. It also has a stray single black wire coming out of it.

  2. I have a wire plus system WP 214 I’ve sorted shortenduoutthe wires going to my headlighis there a fuse to replace a 15 amp or what do I need to do to fix this problem

  3. I have a 13014A switch module that burnt out. Is there a direct replacement for this. It has 2 connectors a 12 pin and a 6 pin that is only using 5 of the 6 pins.

  4. I need a wire plus wiring kit the whole thing for a 2008 big dog pitbull with the 117 s&s motor

    best regards.

  5. I need a wire plus wiring kit the whole thing for a 2006 big dog K9 with the 117 s&s motor

Leave a Reply

Your email address will not be published.