Manufacturing Bare Knuckle Performance Axels at FFC

Article By: Will Ramsey Photos By: James Kemp www.faithforgotten.com Originally Published In The August September 2020 Issue Of Cycle Source Magazine When I first started Faith Forgotten Choppers 11 years ago, I spent a great deal of time with Paul Wideman of Bare Knuckle Choppers. I would ride five hours to Hawk Point, Missouri, just Read More >

Front Fender Narrowing

Article and Photos By: Will Ramsey – Faith Forgotten Choppers Originally Published In The February 2020 Issue Of Cycle Source Magazine When building a chopper, there is certainly something to be said for fabricating every single part in house from scratch. Such an approach allows the builder complete control of the design and showcases a Read More >

The Purge: Shielding A Stainless Steel Exhaust Weld

Article and Photos By: Will Ramsey Originally Published In The January 2019 Issue Of Cycle Source Magazine   A well designed and properly fabricated stainless steel exhaust can be the absolute highlight of a custom motorcycle, both in looks and performance. Week after week we have service customers walking in the door looking for the Read More >

Leaks Suck: Fixing A Leaky Shift Shaft Seal

Article & Photos By: Corey Barnum- Faith Forgotten Choppers Originally Published In The February 2019 Issue Of Cycle Source Magazine   This month’s tech is focused on some basic service work. Today, we have a customer’s 2011 Road Glide in our shop. The customer was complaining of oil drops on the ground towards the left Read More >

Developing A Designers Eye: Fabricating A Stainless Steel Sissy Bar

Article By: Will Ramsey Photos By: Craig Harriman (Corey Took One) Faith Forgotten Choppers – www.faitforgotten.com Originally Published In The March 2019 Issue Of Cycle Source Magazine   It has been a while since I did an “off the cuff” fabrication tech. This month I happen to be fabricating a very simple traditional sissy bar Read More >