Does your Big Dog have an issue?

Wire Plus has the "Perfect Fix" for all Big Dog Owners who are sick and tired of a bike that won’t start!

Wire Plus Powersports Electronics is proud to introduce their new, state-of-the-art "HCM" Retrofit Kit for all EHC module equipped Big Dog Motorcycles. This is the perfect fix for all Big Dog owners tired of not being able to start their bike due to electrical problems. This replacement module works with all of the switches used on all 2004 models through current Big Dog Motorcycles. Each kit comes complete with Wire Plus’ proven power module and switch control module configured to work with the ground input switches used on the Big Dog Motorcycles.

Wire-Plus products are built to survive the rugged urban environment. Their products feature vibration resistant, solid-state breaker technology (the breakers never have to be replaced) and a replaceable start relay that can be purchased at any auto parts store.

Their power modules are submersible waterproof and very compact in size with harnesses that are engineered to be smaller than any other on the market. The lighting control module controls the operation of the front, rear turn signals, and provides load equalization and auto cancelling.  It also operates the rear turn signals as brake lights and running lights with one wire hook-up. Wire Plus’ main focus is on the reliability of everything that they manufacture.

Wire Plus has added ring terminals, butt splices and wire to the kits to make the hook-up of the ground wires easier. They have also added wire and butt splices for the wires that have more than one wire going to a pin.

For those interested in obtaining more information on Wire Plus, you can reach them at (620) 221-2417 or check them out online at www.wire-plus.com or email them at sales@wire-plus.com.

Untitled-1

wireplusbigdog

bkr619X220X150

17 thoughts on “Does your Big Dog have an issue?

  1. I have 2000 bigdog pitbull front signal and running lights won’t come on or get power can you help me?

  2. Last week my 05 big dog ridgeback just killed at about 40 mph. Now all the lights come on but no turn signals , no horn no break lights and it won’t start. Went got new battery, had the starter checked and the starter is good. Just nothing at the controls. What could this be ???

  3. My 2006 Big Dog K9 Was stalling out when I hit turn signals or horn Some times the horn d

    blasts and the stall happen at the same time. Now it wont start and my lights come on but clicking noise by wiring near the battery??? ECH?? what sould I check first?

  4. My 2006 big dog ridgeback starts fine and will idle forever. However, when I touch any of the buttons i.e. horn, turn signals, high beam, front and rear brake, the bike will stall out. It will start right back up and stall when I hit them again. The problem is intermittent though. Sometimes it will run fine, and then randomly start doing it again. The ehc is throwing an air ride light when it stalls, but the ridgeback has no air ride.

  5. My big dog boxer keeps burning up key switch wires and when it does work the solenoid sticking and dont even have to hit the start button itll just run until you unhook the battery. Please help i need to get back on the road

  6. My husband has a Big Dog Chopper and the bike runs wonderfully. He bought it about a month-and-a-half ago and when you brought it home everything works as it should except for the brake light in the turn signals. All he ever wanted was a chopper and he finally got one and he can’t ride it because are the brakes in the turn signal. Can somebody please help me help him figure yourself? It will be so appreciated

  7. Bike wouldn’t start . Took battery in and it tested fine . When I hooked back up the headlight and part of the Speedo comes on with no key in the ignition !
    2005 Bigdog Chopper !
    Original EHC … maybe it’s shot ? Maybe shorted ?
    matthewjasicki@icloud.com

  8. 04 BD no low beam on headlight, its not the bulb, put new headlight harness on still no low beam high beam works fine, yea i dont get it. need help.

  9. My 2006 K9 won’t start but all the lights work. I been told the EHC needs replaced. Is this a common issue?

  10. I am interested in a price on a new computer for my 2008 bigdog k-9 with efi thanks

  11. I am experiencing the same symptoms on an ’08 K-9 with EFI. I think its the ECM. “Start” button doesnt function, but engine cranks.
    Email me!

  12. I have a 2005 big dog bulldog. It’s been having electrical issues. At this moment, when it try to turn it on, there is no sound of clicking, my speedometer lights up and all the lights on the speedometer flash . I don’t know what the problem is. Any help?

Leave a Reply

Your email address will not be published.