Home » Archives by category » Tech Tips/DIY » Motor

Project X-Wedge

Project X-Wedge

Article By: Wink Eller Photos By: Lisa Ballard Originally Published In The September 2012 Issue Of Cycle Source Magazine I feel compelled to set this up a little bit. It was years ago when S&S first released the X-Wedge engine that I was immediately impressed with it, but it was just two short years ago […]

Heads For Knucks

Heads For Knucks

Article And Photos By: S&S Cycles Originally Published In The February 2015 Issue Of Cycle Source Magazine In this article we’re looking at how a product is manufactured, specifically S&S cylinder heads for knuckleheads. But first a little background. Flathead Power was originally a Swedish company that made parts for vintage Harley® engines. The company […]

Stepping It Up–Part 4

Stepping It Up–Part 4

Article and Photos By: Joe Trozzo As you may recall, a few months ago I did some tech articles on the Super Tuner and the Thunder Max Auto Tuner. It’s now roughly 9000 miles later and here is my summary of the two products. I would like to remind you that this is just my […]

Want more information on advertising with Cycle Source in Print or On-line? Email us and we’ll send you info today!