2010 March » The Cycle Source Magazine World Report

The pre-ride check list for the annoying rider

Because we care, Bikers And Computers 6 Responses »

Mar 312010

The pre-ride check list for the annoying rider

From the Garage Girls, I had to borrow it, enjoy! Tuesday, March 30th, 2010 1. Comb baseball player goatee and mustache 2. Spend 6- hours polishing gaudy chrome pieces. Be sure people can read the “Live to ride—ride to live” statement on your inspection cover. 3. Assure suspension can handle at least 560 pounds of rider 4. Pack cell phone and have tow service numbers programmed. 5. Affix tassels from daughters bicycle to handle bars for added lame appearance. 6. Test flashers for when bike breaks down (99% probability) 7. Put on your wrist brace to help carpal tunnel from Read More>>>

California Sidecar Introduces The Custom Trike Kit

New Products No Responses »

Mar 302010

California Sidecar Introduces The Custom Trike Kit

California Sidecar, the trike conversion, sidecar and motorcycle cargo trailer specialists known as CSC are proud to introduce The Custom. A bold and original combination of CSC’s Volusia Trike (for the Softailâ) and a custom chopper trike, this innovative machine was born from a desire to build a dramatically different kind of trike. Standard features for CSC’s fresh new Custom include a complete new front-end with custom polished billet aluminum triple trees raked for that chopper look, carpeted trunk with remote operated hatch release, custom seat by Saddleman, trike chassis with upgraded high performance disc brakes and calipers in addition Read More>>>

RAT ROD ROADHOUSE ROUND-UP

New Products No Responses »

Mar 302010

New art from Larry Grossman Larry Grossman is at it again, and his electrifying new print "Rat Rod Roadhouse Round-Up" has something to appeal to everyone – whoever, whatever, or however old you are! While reflecting today’s happening Rat Rod scene, this picture has also frozen a moment in time that could be right out of the ’50′s or 60′s. It features a kool ’30 Ford Hemi-powered Rat Rod, a ’51 Ford Kustom Sled, a Harley Chopper, and a ’50′s era fighter jet streaking overhead. Of course there’s also hot babes, bad boys, and even a smoking dog(!), all hangin’ Read More>>>

Shot of the week

Shot of the Week No Responses »

Mar 292010

Photo by Chris Callen Here is Mitch working at the Limpnickie Lot booth in Daytona.

DeathTraps Chopper Campout

Events, Updates No Responses »

Mar 272010

Raffle bike from South Side Kustoms

Events, Updates No Responses »

Mar 272010

The First Production of the Hitman bobber (new base model) to be raffled off July 31st 2010 at SSK’s Rumble in the City Event (you do not have to be present to win). Tickets are ONLY $10.00 each or 3 -$25 and benefits the Buffalo Dream Center (www.buffalodreamcenter.org ) . See build updates here – http://www.south-side-kustoms.com/HitmanBobber.html You can stop in to get your tickets or mail in a check or money order payable to South Side Kustoms attn: raffle tickets to South Side Kustoms 596 Michigan Ave Buffalo NY 14203 Watch for the completion of this build very soon.

See you at the SWAP!

Events, Updates No Responses »

Mar 262010

I will be at the Long Beach Swap Meet with Duane, Jason and Mike with our A-Team van. Be sure to stop by as I will have some of the Special Indian Larry Commemorative Issue for sale. You can also sign up for a subscription with Cycle Source and they will bill you later. Save that twenty bucks, buy something rusty or get one of these, I know I am………….

Bryan Fuller’s 25 Year Dream Car Finally Comes True!

Builders, Updates No Responses »

Mar 262010

Bryan Fuller's 25 Year Dream Car Finally Comes True!

Bryan Fuller, the driving force behind Fuller Hot Rods and popular co-host of the SPEED channel series "Two Guys Garage" has been building, repairing, and restoring vehicles for as long as he can remember. Utilizing his natural talent and ingenuity, Fuller has worked on an array of projects. From Chassis fab to panel fabrication, Fuller has assisted in fulfilling the automotive desires of countless friends, customers, and viewers. But, after 15 years of full time professional creating, there wasn’t time or cash for his own car…not any longer!. At a young age, Fuller’s love for speed and tinkering resulted in Read More>>>

LE PERA UNLEASHES NEW “VILLAIN”

New Products No Responses »

Mar 262010

Once again Le Pera has taken seat designing to another level with the introduction of the head turning “VILLAIN” for 04-10 XL’S. Bob Jr. designed this truly unique seat that will completely change the look of your bike. It was originally designed for touring bikes only, however, the demand was so high he added the Villain seat for 04-10 XL’S, Softails, and 06-10 DYNA’s. Le Pera’s VILLAIN is like nothing you’ve seen before. If you demand the finest quality and unique styling you need look no further. Suggested retail starts @ $488.00. Visit the complete Le Pera line up at Read More>>>

"A Walk with Heroes" Tribute Receives Accolades; Ermey Scheduled to Headline Buffalo Chip’s Salute to Veterans

Events, Updates No Responses »

Mar 252010

"A Walk with Heroes" Tribute Receives Accolades; Ermey Scheduled to Headline Buffalo Chip's Salute to Veterans

Sporting polished chrome and miniature American flags whipping in the frigid reeze, a multitude of seasoned bikers made their way to Daytona Bike Week 2010 to support the "A Walk with Heroes" Veteran Tribute. The tribute, sponsored by the Legendary Buffalo Chip in conjunction with the Plaza Resort & Spa, has been heralded as one of the largest and most successful Veterans Tributes and celebrations in the United States. The homage which included a selection of prestigious speakers, top level entertainment and the largest balloon launch in Veteran memorial history was supported and attended by more than 75 Veteran related Read More>>>

SOFTBRAKE EXTENDED PEDALS FOR 2010 HD® BAGGERS

New Products No Responses »

Mar 242010

SOFTBRAKE EXTENDED PEDALS FOR 2010 HD® BAGGERS

Softbrake recently introduced several new additions to their extended brake pedal line up. Designed specifically for 2008 – 2010 HD® Bagger models the new arms are 2” longer than stock. Users of both early and new versions have reported these application specific extended pedals provide superior braking control and pedal feedback for safer, more predictable stopping. Designed to be floorboard compatible with HD Baggers, the pedals are a quick bolt-on replacement part and accept factory rubber pads. All SoftBrake pedals are manufactured from premium quality American steel, and finished in durable show quality chrome or black powder coat. Three different Read More>>>

Dont Forget

Events, Updates No Responses »

Mar 242010

From The Editor – What Really Matters

From The Editor, Limpnickie Lot Social Media 2 Responses »

Mar 242010

I’m not sure if it’s my age or just that I was brought up by bikers, no not chrome cowboys, real honest to God bike people, but I always seem to come back with the same answer when times are tough. I have all in need in my brothers, and sisters in this case. This picture was taken by Lisa Ballard one night in Daytona, it was 30 some odd degrees and we were sharing a bowl of Mac-N-Cheese with Athena. I had whipped up the batch on an electric hot plate in order to promote warmth of some kind. Read More>>>

Cook Customs is at it again

Builders, Video 1 Response »

Mar 232010

So you just built the AMD World Champion Bike and it took nearly all of your energy to get it done… what do you do? Dave has had this little project hanging around the shop for nearly 2 years and he spent some time working the bugs out of it. It still doesn’t have the cosmetics on it yet, but this 3 wheeled vehicle is completely fabricated by Dave Cook of Cook Customs and his buddy Matt Drew. It all started with a hood scavenged from Jay Allen’s property at the Broken Spoke – Sturgis County Line in Sturgis SD. Read More>>>

Wimmer Custom Cycle Introduces the Ultra Sucker Air Cleaner

New Products No Responses »

Mar 232010

Wimmer Custom Cycle Introduces the Ultra Sucker Air Cleaner

The latest introduction to the ever-growing line of quality intakes and products from Wimmer Machine is the Ultra Sucker air cleaner. It was designed to work with all V-Twin (USA) motors, both with carburetors and fuel injection systems including DBW. The Ultra Sucker provides provide better airflow and is part of the world famous line up of products offered from Wimmer Machine. Increased performance and looks form this totally CNC made in USA intake. Rain protection also available. There are also two types of breathing systems. Our patented top breathers or the new IBS totally enclosed system. The choice is Read More>>>

VIDEO: Power Up With the Bob Cat Sportster Pipe

Exhaust No Responses »

Mar 232010

The D&D Bob Cat – 2-into-1 Pipe Pumps Up the HP & Torque By 10%. D&D has released the 2004 through 2010 Bob Cat Sportster Pipe that increases performance, torque and a soul-satisfying tone. Get All the details at D&D Performance Enterprises.

PAUGHCO CATALOG FREE ON CD

New Products No Responses »

Mar 222010

That’s right you can now receive the complete 2010 Paughco catalog on CD for just the cost of shipping and handling. This is no watered down version but the entire 325 plus page collection of the world’s oldest, most respected line of Chopper, Bobber and restoration parts. From the largest and most comprehensive line of Springer front ends, tanks, fenders, primaries, replacement wheels, exhaust, handlebars and related accessories to the unprecedented collection of custom and replacement frames, it’s all here on this single CD. And it’s FREE! All you pay is S&H of $2.95 each. To order yours visit Paughco Read More>>>

Shot of the Week

Shot of the Week No Responses »

Mar 222010

Warren pulling into the Willie’s Tropical Tattoo Bike Show. Do you see me?

Guitar Vixen, Orianthi, Set to Dazzle during Chip’s 2010 Rally Week Lineup

Events, Updates No Responses »

Mar 212010

Guitar Vixen, Orianthi, Set to Dazzle during Chip's 2010 Rally Week Lineup

Rowdy Chipsters and hard core rockers won’t want to miss this. Orianthi, the music industry’s most talked about guitar sensation, is scheduled to play the Legendary Buffalo Chip on Tuesday, August 10 during Sturgis Rally Week 2010. With her cascading blonde locks and cherry red electric guitar, the 24 year old prodigy combines sex appeal and natural talent to create a show-stopping musical experience. Most recognizable as the fierce and sassy guitarist in Michael Jackson’s "This Is It’ documentary concert-film, Orianthi Panagaris was chosen amongst a wide selection of qualified contenders as the lead guitarist for his "This Is It" Read More>>>

Add this to your schedule!

Events, Updates No Responses »

Mar 212010

Kennedy High School Bear Project

Events, Updates No Responses »

Mar 212010

Kevin” Teach” Baas just sent in some amazing pictures of the Bear Chopper that the students of Kennedy High School Chopper Class completed last year. Don’t forget to support the class at the Donnie Smith Bike Show next weekend as the display their latest creation. Great job!

Sweet Piece of Hardware — a must have item for the do it yourself fanatic!!

New Products No Responses »

Mar 212010

Sweet Piece of Hardware -- a must have item for the do it yourself fanatic!!

The Chain Tensioner is a 15 Tooth “MADE IN USA” Idler sprocket (SEALED BEARING) and is manufactured for a 530 chain. It features a 5/8? X 2 1/2? bolt with lock washer/nut, 1/2? SS spacer and a 1/8? Counter bore for paint or powder coat clearance. 1 1/8? of space is available between center of the sprocket and the center of frame rail — (for use on Left Side Drive). THIS WORKS GREAT FOR FULL WRAP FENDER APPLICATIONS WHERE YOU CAN NOT MOVE THE WHEEL! TECH NOTE — YOU MUST HAVE WELDING SKILLS TO INSTALL. THIS IS A WELD ON Read More>>>

ROLLING OUT FROM OKLAHOMA

Builders No Responses »

Mar 212010

Dar Holdsworth, Brass Balls BossMan, keeps rolling out the hits from his little shop in Oklahoma City. He recently took his iron down to Texas to show off some of his latest designs.

Flat-Surface Mount for Electronics, Drink Holders and More

New Products No Responses »

Mar 202010

Flat-Surface Mount for Electronics, Drink Holders and More

Don’t have a round handlebar? But still want to mount your beverage, GPS, radio, iPod, phone, camera or other electronics? The Flat-Surface Mounting Bracket works on almost ANY flat surface! · scooters, trikes and other motorcycles with panel space · boats · ATVs/UTVs · classic cars · RVs · golf carts You can move your item from motorcycle to ATV to boat (etc!) with just one screw adjustment! The Flat-Surface Mounting Bracket even includes our UltraSecurity feature. This means the Bracket and electronics can be mounted at ANY angle (even ‘point down’) and you will never lose them (nor can Read More>>>

THE “COMPLETE” SHOVELHEAD® GASKET KIT

New Products No Responses »

Mar 202010

By now you are probably wondering why we are running all of these gasket products. We figure with the warm weather heading your way, you should be working on your bike, getting it ready to RIDE! If the time has come to give your trusty Shovelhead® a thorough rehab, you’re going to need the finest engine sealing components you can get. No problem, James Gaskets has you covered with this Complete Shovelhead Motor Gasket Kit. This premium grade, all inclusive package is specifically designed to cover 80” Shovelhead® engines from 1966-1984. Each head gasket features Firering bore armor and is Read More>>>

COMPLETE 45” GASKET KIT

New Products No Responses »

Mar 202010

If you’re serious about sealing up that leaky 45” Flathead, James Gaskets has an all inclusive motor gasket package that is going to make the job a lot easier. This is a complete motor gasket set developed specifically to meet the requirements of 45 Flathead engine builders. Each kit includes all the gaskets required for a total rebuild from the cases up and includes fully embossed soft copper head gaskets with a final crush value of 0.020”! Just the ticket for restorations or 45 based Chopper builds. You can get yours for just $63.73 by calling 775-246-2220 or catch them Read More>>>

SS Trike Adds Excitement to the 3-Wheel Experience

New Faces No Responses »

Mar 202010

SS Trike Adds Excitement to the 3-Wheel Experience

SS Trike has eliminated the lack of excitement that most 2 wheel riders experience when switching from a 2 wheeled vehicle to a 3 wheeler. At first glance you can’t help but notice the bold “Big Wheel” styling, and that is just where the difference begins. Due to its innovative low-slung chassis design, the SS Trike is more than capable of handling the power of its XWedge V-Twin engine. The excitement of this ride is further enhanced by a smooth, race-inspired 3 speed automatic transmission. This standard package is enhanced further by a large diameter 24” front wheel wrapped in Read More>>>

The Legendary Buffalo Chip Creates Unique Opportunity for South Dakota Students

Events, Updates No Responses »

Mar 192010

The Legendary Buffalo Chip Creates Unique Opportunity for South Dakota Students

The Legendary Buffalo Chip, Black Hills Harley-Davidson and Prugh Design have officially made a commitment to the future of motorcycling. A press conference held on Tuesday, January 26th announced the kick off of the 2K10 Challenge, an in-classroom bike build project, pairing an elite motorcycle builder and exceptional parts with students seeking a future in the motorcycle industry. The finished motorcycle is scheduled to roll out of the shop in less than 16 weeks and is expected to exceed the standards of a world-class, custom bike. The Legendary Buffalo Chip made the Challenge and other leading area businesses have come Read More>>>

RENEGADE PHANTOM R2 Series

New Products No Responses »

Mar 192010

Renegade really knocked it out of the park with the new Phantom R2 Series. Shown here, the PHANTOM RACINE is just plain smokin’ with its 9 fluted spokes, cross cut rim and imposing “black anodize with machined highlights” finish. Unlike similar designs these spokes are not overpowering while creating a distinctive impression. Additionally, the slender spoke pattern provides a significant weight reduction and less rotating mass. And get this, pricing for the new PHANTOM line starts at just $899.00! Rims are available in 16” to 26” diameters and widths from 2.15” up to a massive 14”! If this Bad-In-Black finish Read More>>>

Derby Inspection cover kits

New Products No Responses »

Mar 192010

If you do any wrenching on your EVO® or Twin-Cam® machine at all then you’re certain to be pulling the Inspection/Derby covers on a regular basis. A proper seal in these areas is mandatory and getting that seal when the surface is even slightly uneven can be difficult. To meet the challenge James Gaskets provides a variety of derby and inspection cover sealing products that are anything but run-of-the-mill gaskets. For EVO models ’79-’84 both gaskets have a solid steel core completely encapsulated in NBR rubber with molded beading. If you’re working on a 1999 to present Twin-Cam® model the Read More>>>

KNUCKLEHEAD MOTOR KIT

New Products No Responses »

Mar 192010

Teach might like this one……… When rebuilding the legendary Knucklehead® engine, making certain things seal up tight is a major concern. To ensure the gaskets used provide the very finest seal available James manufactures a complete kit designed specifically for these unique engines. The premium gasket set fits 1937-1947 Knuckles and features Teflon® coated head gaskets with Firering bore armors for a tight seal and perfect fit. Cylinder base gaskets are manufactured from rubber-covered metal and include elastomeric beading for a superior seal and excellent torque retention. Suggested retail for the complete Knucklehead Motor Kit is $42.73 and they are Read More>>>

New Narrow Gas Tanks for Your Homebuilt Chopper

New Products No Responses »

Mar 182010

New Narrow Gas Tanks for Your Homebuilt Chopper

Lowbrow Customs has received the first shipment of Cleveland Cyclewerks gas tanks that have been produced. These tanks are available no where else, the 2.1 gallon Narrow Alien Tank and the 2.5 gallon Sporty Tank are cool, affordable custom tanks that look killer on choppers of all types.

Motorcycle Industry Possess Great Bikes and Big Hearts

Events, Updates No Responses »

Mar 182010

As Daytona Bike Week 2010 festivities came to a close, the third annual Seminole Hard Rock Roadhouse Biker Fusion event is being heralded as the rallies most successful and talked about charity events. The third installment of the prominent gathering, notorious for bringing the industry leaders and enthusiasts together for a great cause, has once again proved that the motorcycle community not only has great bikes but also big hearts. They raised almost $10,000 total, which will be sent to Soldier’s Angels and Post 911 Foundation. An impressive list of world-class builders, industry elite and media gathered at the Doghouse Read More>>>

Hot Leathers Boasts a Successful Showing at Daytona Bike Week 2010

News No Responses »

Mar 182010

Hot Leathers Boasts a Successful Showing at Daytona Bike Week 2010

Cycle Source would like to personally thank Hot leathers for handing out over 30 cases of Cycle Source at their locations. We are honored to cross promote with this great company! If you made it out to Daytona Bike Week 2010 not only did you have the opportunity to mingle with over 500,000 bikers, attend a number of hot parties and witness a vast array of bikes but more than likely you also came across one of Hot Leathers’ impressive booths. Hot Leathers, the industry leader in motorcycle apparel who is also synonymous for offering the best selection of motorcycle Read More>>>

COMPACT ON-BOARD POWER SOURCE FOR DRAG CARS AND BIKES

New Products No Responses »

Mar 182010

COMPACT ON-BOARD POWER SOURCE FOR DRAG CARS AND BIKES

Weight and space are always a consideration for Drag racers and these new On-Board Battery Pack modules from TWP address both concerns directly. The unique Battery Packs provide a compact, light weight, reliable, on-board 18-Volt power source for 12 volt accessories in drag cars and bikes. High output Lithium-Ion battery and application specific rubber insulated mounting plate weigh just 3 lbs and measure 4.5” L x 3.5” W x 3.5” T. Perfect for race packs, ignition, oxygen sensors, solenoids, etc. Batteries recharge in just 1 hour using the supplied charger. Each kit is a total package including charging station, mounting Read More>>>

POWDER COAT N’ CHROME CHOPPER AND REPLACEMENT WHEELS

New Products No Responses »

Mar 182010

POWDER COAT N’ CHROME CHOPPER AND REPLACEMENT WHEELS

Check it out. Paughco is now offering their line of custom spoked wheels finished in red and black powder coat. Perfect for an Old School Chopper or contemporary Bagger these colored wheels really POP! Each rim and outer portion of the hub is powder coated, fronts have a screw on cap, while spokes and inner hub section are fully chromed. For the front you can order in sizes 21 x 2.15 and 16 x 3 while rears are available in 15 x 5.5 and 18 x 5.5. Current models are available in 40-spoke only. Wheels come with bearing pre-set and Read More>>>

Super Clear Small Oval Mirrors

Uncategorized No Responses »

Mar 172010

American made Aeromach mirrors offer up to 40% greater clarity. These small ovals look cool and provide the ability for you to see behind you whether you are riding a rigid, high-performance stroker or a stock sled. The reason for the clarity is because of the structural strength of the billet construction and using glass optics instead of plastic like a lot of import mirrors do. Check out the latest designs at Aeromach USA. del.icio.us Tags: Aeromach USA Provided by Biker Pros

Jeff Cochran is Going Solo

Because we care, Bikers And Computers 1 Response »

Mar 172010

Our friend Jeff Cochran got some love over at the Chop Cult Site. Way to go , the bike looks great!

Dice Release Party

Events, Updates No Responses »

Mar 172010

Florida Legislature Is In Session

Motorcycle Rights, News No Responses »

Mar 172010

From Our friend Rogue Like many areas of the country Florida’s Legislature is in session. That means there will be a lot of new laws proposed and passed. I try to pay attention to these proposed laws and how they will affect, motorcyclist, friends, family and me personally. I also try to let others know so that they can look at these proposed laws to see how they will affect them. There will always be different opinions and rightfully so and everyone should look at the pros and cons of each issue. Any law that is passed will affect all Read More>>>

The Numbers Are In

Limpnickie Lot Social Media, The Limpnickie Lot Gives Back program No Responses »

Mar 172010

Photo by Steve B. Written by Lisa Ballard Our first ever food drive for the Limpnickie Lot was a huge success in Daytona Beach! We donated a grand total of $550.00 to the Second Harvest Food Bank. We chose to spend the first hundred dollars at the local Food Loin store to add to the bins, which was a total of 140 lbs of non perishable food. We then proceeded to write a few checks totaling $450.00 to the Second Harvest Food Bank.

Garage Girls Interview Rollin from Spectro-Oils

Garage Girls, Personalities, Video 1 Response »

Mar 172010

Spectro-Oils have been a HUGE supporter of Cycle Source Magazine. We use Spectro-OILs , do you? Big thanks to the Garage Girls for sharing this with us!

Colleen Swartz gives back daily

Because we care, Bikers And Computers 1 Response »

Mar 162010

Our staff photographer Colleen Swartz has been carry a torch for CRUSA and we would like to help her spread the word. “Many, many of you know me from the Motorcycle world, many from the photography world, some are friends, some are family, but I want you all to know how happy I am to have become involved with CRUSA. I am a foster home for unwanted Cairn Terriers and it really has added a dimension to my life that I never anticipated. I take in these damaged little creatures and watch them bloom into loving and wonderful pets. I Read More>>>

Lick’s Cycles latest brainstorm and you can win Fabulous prizes

Bikers And Computers, Contest No Responses »

Mar 162010

Lick’s Cycles latest brainstorm and you can win Fabulous prizes

Ok here’s the deal…. AJ and I started Licks way back in 2002. Over the years we have scrimped, saved, guerilla marketed, swapped services, bartered, traded parts, and even exchanged a few sexual favors to help build this business into what it is today. We have seriously worked our tails off for the better part of a decade and are very proud of the business we have built. We have grown from working off a milk crate in AJ’s garage to a nationally recognized business that has customers and friends from coast to coast and beyond.

Hot damn…….we are alive again

Uncategorized No Responses »

Mar 162010

Well it just goes to show you that you can be kicked down but with true perseverance you can survive and get back up. We are alive again and are getting ready to move everything that was posted at the Cycle Source blogspot to here. We are going to keep the blogspot as there are followers on there as well. If your event has past, sorry for the missed action on the Cycle Source site. Be sure to keep sending me your releases and to that mean little virus, please kiss our ass!

Custom Cycle Control Systems Introduces Ape Hangers

New Products No Responses »

Mar 152010

Custom Cycle Control Systems Introduces Ape Hangers

Custom Cycle Control Systems, Inc. introduces their new 12” and 16” Ape Hangers complete & assembled with Climax Hand Controls. CCCS produces by far the cleanest looking “self-contained” handlebar systems available in the market today. The hand controls are completely concealed…All the lines, wires, and cables run through the bars and exit below the top tree. You can have CCCS custom make any size Ape Hanger built to your specs starting at an additional fee of $250. Additional features and benefits of a CCCS complete system include:

In case up missed it

Limpnickie Lot Social Media, Video No Responses »

Mar 152010

Here is the Limpnickie Lot garage set up that we had on display at the V-Twin Expo. Big thanks to Chris and Rob for completing this huge task!

Limpnickie Lot Garage

Video No Responses »

Mar 142010

Limpnickie Lot Cincinnati V-Twin Expo!!!

EVO/RUBBER MOUNT SPORTSTER CHOPPER CHASSIS’

New Products No Responses »

Mar 142010

EVO/RUBBER MOUNT SPORTSTER CHOPPER CHASSIS’

Paughco is now offering 2 different style rigid frames for EVO Sportsters. The Single Loop Rigid Bobber frame is designed for 1986-2003 Sportster engines and features a distinctive 1 1/2” single loop downtube and 1 1/8” lower frame rails. A variety of rake, leg and stretch dimensions are available starting at just $986.95. For 2004 and later Rubber Mount engines Paughco offers a no hassle chopper chassis that accepts all of the OEM mounting hardware. Available in a number of popular rakes and stretches the frames have a 1 ½” backbone and 1 ¼” downtubes. Prices on the Rubber Mount Read More>>>

Wire Plus Introduces Black Rectangular Digital Speedo

New Products No Responses »

Mar 142010

Wire Plus Introduces Black Rectangular Digital Speedo

Wire Plus Powersports Electronics is proud to introduce their new, state-of-the-art digital instrument panel…Now available in black. This new innovative rectangular solid-state digital Speedo features a speedometer, tachometer (bar graph tach on rectangle shape only), trip, odometer and all indicator light functions. Unlike most of the digital units on the market, Wire Plus instrument panels feature super bright display technology for true daylight readability with a built-in light sensor for auto dimming for night riding. Various mounting options are available including a flush mount in your gas tank. MSRP is $399.95.